- Color: Warm White
- Brand: WOBANE
- Indoor/Outdoor Usage: Indoor
- Special Feature: DIY connection, Included 24W adapter
- Light Source Type: LED
- Power Source: AC/DC
- Occasion: Christmas
- Style: Modern
- Color Temperature: 2700 Kelvin
- Controller Type: Remote Control
- DIY LED light strip: 6 PCS pre-cut strips, total 9.8ft, many kinds of connection option, Great way to upgrade your cabinets, closet, desk, TV back, bookshelf, bed, wardrobe, display case etc
- Super Bright & Brightness adjustable: Super bright LED cabinet lights delivers total 1500 lumen, Came with RF dimmer to adjust the brightness. LED’s CRI is greater than 82, providing high-quality lighting
- RF Wireless remote control: 17-Key RF remote has timing off, dimming, hot buttons, rematch and dynamic function, 60 feet control distance
- Reliable kit: High quality adapter and strip light, The LED tape light working voltage is DC12V, extremely Low voltage and heat
- Easy installation: All installation accessories are included. No tools required. Install light bars by yourself in minutes, just Clean – stick on -connect. Backed with strong adhesive tape, screw-free to protect your furniture
























![Wholesale π 'Lyra' LED Night Light, Plug-in [6 Pack] Super Smart Dusk To Dawn Sensor, Night Lights Suitable For Bedroom, Bathroom, Toilet, Stairs, Kitchen, Hallway, Kids,Adults,Compact Nightlight, Cool White β€οΈ](https://www.walllampstore.com/wp-content/uploads/2022/12/41JEgmDjzEL-247x247.webp)






Virginian –
I purchased two of these kits based on the high customer satisfaction and price. Based on another reviewer’s recommendations, I also purchased a package of LED cover diffuser tracks (which @ $36, cost more than than the lights themselves!). I only needed 2-1/2 tracks for my cabinets, so the other 7-1/2 tracks that came with the 10-pack will likely be discarded ($$). Oh, and the special “nano” tape used to attach the tracks firmly under the cabinets is another $7.The tracks are nice, but not really necessary. They help to make the lights slightly less intense (the “diffusion”), but the main thing the tracks do is allow you to install the lights under the cabinets more neatly, in a straight line. Would I buy that accessory again? Probably… (especially now that the price is less), but I would order fewer track pieces.The most challenging part of the project was cutting out a small wedge where some of the cabinets meet. For my project, I only had to cut out three. I think most people who purchase these lights don’t bother to cut out any wedges under the cabinets, opting instead to just route their sticky lights around each wedge (there are some photos of this posted).Since I was using aluminum diffuser tracks, I needed to cut a few wedges so the track could continue in a straight line (see first two photos of the finished wedges). It wasn’t that difficult using an oscillating/ vibrating saw (see third photo).Using the advice of other reviewers, I held the lights up to the cabinet before installing, to determine if I wanted to face them down toward the counter or toward the back wall. As some here mentioned, facing the lights down does result in a more noticeable reflection of the lights (in the shiny counter), so I opted to face the lights toward the back wall. There’s still a subtle reflection in the counter, but it’s not quite as stark. These lights are plenty bright on their max setting so no worries about them not being as bright if you opt to face them toward the wall.To hide the power cord, I just stapled the wire under the cabinet in a couple places, and hid the excess cord behind the refrigerator on one set of cabinets, and up into a gap next to the cabinet in the other set (see the 4th & 5th photos).The whole project took about two hours, including putting some colored led lights inside the liquor cabinet. No tracks used in there… just taped the colored lights along the inside perimeter, facing toward the middle of the cabinet (facing each other), so the lights wouldn’t reflect as much off the mirror in the back of the cabinet. The colored cabinet lights I purchased from Amazon as well. (See last two photos of the finished project.)After the lights were all installed, I was able to quickly & easily pair one remote to both sets of the [white] undercabinet lights. Even though they are on separate walls, they now turn on & off, dim, etc., together at the same time when I use the one remote. (The colored liquor cabinet lights use a different remote with different features.)To pair (or “match”) the second set of lights to the one remote, just hold the button down on the wall-mounted dimmer about 3 seconds as instructed on the manufacturers description above, then use the remote to turn it on/off. It’s now “matched” to the remote.
Mike –
Between the full Woban light sets and the accessories kit, I own about six units. I’ll have some good things to say in a bit, but first let me raise a design flaw in their overall vision This is especially true as the units are primarily designed to be installed in cabinets, which is what I am doing. It’s like they forgot a dimension. For example. let’s say you want the wiring–within a cabinet–to run up the side and then attach to lights that run along the bottom or top of each shelf. This is NO connector designed for this. While there are connectors that go at right angles, they’re along the same plane. In fact, Wobane recognizes this is by recommending–in the accessory kit–that you “bend” one of the wires at a right angle too go around a corner. I’d feel much safer with a piece of hardware designed to deal with corner angles than I do by bending one of the wires to accomplish this. Also, why not make a three-legged junction rather than saying that we can use the use the four-legged one and just skip one junction. People asked about this for a reason! I am installing these lights into a large fireplace surround built-in bookcase with crown molding built for LED light installs. I will likely deal with every possible angle imagineable, all while keeping the hardware as discrete as possible. It’s a shame that between the full LED sets and the accessory kit that Wobane did not come up with some simple hardware solutions that many of us are facing. What I do like: relatively simple to install; mostly discrete appearance; the overwhelming lighting options, that include timers; the ability to synch all units to a single remoter (or perhaps 2 in my case ;-). Looking forward to the final install!
janis –
I bought several of those for under cabinets and also for my TV. Installation was a breeze. Iβll buy more ad needed.The only issue is that Iβm having 4 different sets of LED, standard length as it comes in the package and Iβm pairing one rf remote to control all of them at once. It worked for awhile but now one of the led strips doesnβt turn off. It does turn on though when I unplug the controller and plug it back in. What am I doing wrong? RF LED Control is T917 and the remote is RM006UPDATEI sent a message to the seller. Within 24 hours I got a reply back and a new controller and remote on its way ad free replacement. Andy was very competent and knew exactly what my issue was and how to fix it. Excellent customer service. Iβll keep buying from WOBAN as neede.Thank you Andy