- Brand: Ensenior
- Color: 5000k – Daylight
- Material: Plastic, Metal
- Style: No can
- Light fixture form: Close to Ceiling
- ?γIC RatedγThis canless LED recessed light is IC rated, which is permitted to be in contact with insulations in ceilings, meaning the junction box is thermally protected. It only requires as small as 2 inches ceiling spaces, fits various ceilings, and joists. Recessed can is no longer a limitation for your choice.
- ?γHigh BrightnessγThe 6-inch slim lights use the new generation of LED chips with higher lumens and lower power. 1050LM consumes 12 Watts, which equals to 110W incandescent lamp, saving you up to 88% in energy costs. Frosted LED lens for anti-glare and scratch-resistant.
- ?γEasy InstallγThe low profile recessed lighting is suitable for retrofit and new decoration: Cut a hole in ceiling with 1:1 hole template; Connect the Jbox to the cable; Use spring clip to fix it on the ceiling. Hassle-free, the installation can be completed in minutes.
- ?γWide ApplicationγUltra-thin body, 5%-100% smooth dimming, compatible with most dimmers, suitable damp location, meets kinds of needs in applications such as kitchen, living room, bedroom, bathroom, workplace, common areas, outside soffits and other hard to reach spaces.
- ?γHighest Industry StandardsγThe whole Ensenior’s recessed lighting is certified by ETL & Energy Star of a high standard. Different from the wire nut of other brands. Our high-quality wire terminal has passed UL certification. Give you the most top security.









































TheTruth –
I recently installed drop ceiling tile covers in our basement to replace/hide those old chalky ones and also replaced old can ceiling lighting which used a big metal housing above the tile.These lights are lightweight, the wiring is easy to connect into the junction box provided and it’s literally plug and play. When connecting the wires to the adapter inside the junction box, turning the adapter clockwise while pushing the wire inside makes it very easy. It’s in the directions but I didn’t read them so it ook me a few times to figure out why the connections weren’t holding. To remove the wire, you can’t just pull out. You turn counterclockwise while pulling the wire out. Quite simple actually.There is a circle template provide to make exact cuts in the ceiling for the light to fit securely. In my case, to cut holes in the drop ceiling tiles, I bought a Goldblatt G05141 drywall circle cutter and set it to match the dimensions of the circle template. Easy peezy.For every tile covered, I put the old chalky tile on top. For the ones with a light, the chalky board rests on top as well but I didn’t attach the light fixture to the chalky board and instead attached to the tile cover itself. The cover is thin plastic so when attached to the old board, the light would press up causing an indention in the plastic tile. The fixtures are light enough to where I attached them to the plastic tile itself using a piece of regalar cardboard for the fixture springs and it doesn’t droop. For the junction box, I just placed that on top of the old tile. Hope that made sense.Some reviewers said the lights didn’t dim enough. I bought a Lutron DVCL-153P-GR LED+ dimmer switch with a Lutron Claro cover. I don’t know if the switch is on the compatibility list or not but there is no buzzing etc. It works great. Inside the switch, there is a dimming adjust “knob”. In some rooms, I moved it to the lowest setting and it’s very dim with the slider moved to the bottom and bright enough with the slide moved all the way up. For example, when I start my day in the home office, I turn on the lights at very dim and then gradually slide up during the day. For other rooms, I start out at the brightest setting. It’s a very nice feature on that switch.For color of light. I’m glad I chose at least 3 options (3/4/5K). I chose to use 4K which I think is a nuetral light. 5K was a bit too harsh and 3K a bit to yellow for my taste. I think if I purchased the fixture with more options, I’d have a hard time making a decision. Lol. The cool thing is that you can easily change the color temp at any time. Example: I’m not sold on the neutral light in a bathroom so I may move the switch to 3K.The lights are more than bright enough and cover a good amount of area.For Customer Service. I cannot say enough kind things about them. One of my lights was missing a spring. The lights come with 2 springs attached to the light. In most cases, especially mine, you need both springs to securely attach the lights to a ceiling. I emailed support, they responded very, very fast. I explained my situation and they sent me out a replacement fixtuee immediately. I don’t often get fast responses or resolution from many companies unfortunately.I recently bought an additional 4 pack of these same lights to finish up another room. No issues, they work great just like all the others.It’s amazing how much easier these are to install vs those big metal can light fixtures.Hope this review helps others.
Jeremy –
Edit: This company gives incredible customer service! If you did a lot of research like I did trying to figure out the best light to go with, I would stop the search and go with them! The product is extremely high quality and their customer service after I mentioned a complaint. That was really my fault was better than I could have imagined and then I have received an as long as I can remember. To take care of the issue. The bottom line is all the companies do the same thing and I was frustrated in the moment because I failed electrical inspection as seen below. But the fact of the matter is it was my fault. Now could they have put a warning label on the box inside the box when you buy it or something? Absolutely! Yes, I’ll companies probably should but they’re always improvements like that, that can be recommended. Again, any company that has that incredible of customer service is a really good company in my mind. And I got to imagine their product is going to hold up well through the years based on that alone.Original: I will take full responsibility as I knew you couldn’t have Romex wire touching through a metal hole but I was in a bit of a hurry and when I had that thought for just a second I thought well, no way they wouldn’t have included that unless it was okay. So the one thing I was disappointed about is it didn’t include them in the box or at least have warning signs all over to say the gasket not included and will be needed to pass code. I would guess that’s a code all over the country.
Kirsten Hammond –
I bought a set of 12 about a year ago for my garage, I was very nervous to drill holes and install a product that I wasn’t sure about and how it was going to perform. After the installation, I was instantly amazed at how well everything worked and looked.The reason why I’m writing this review now is that I recently bought another set of 12 for my living room and when I installed the lights 2 of them had a flicker. I reached out to the seller and explained the situation and 3 days later I had a brand new set of 6 at my front door. Imperfections are going to occur no matter how good anything is but how the situation is handled is important.GOLD STAR service.
J. Johnson –
These lights are low profile, easy to install, and have several light options that are easy to toggle between when you’re installing them. We had one light in the pack that didn’t work, and the customer service was amazing.
M3???? –
I was looking for some very lightweight recessed lighting to install during a drop-ceiling remodel and was very glad that I came across these beauties on Amazon. I was somewhat concerned about quality since they were so inexpensive, but my fears were quickly allayed when I unboxed them. The lights and electrical boxes were very well packaged. The connection boxes come with push connectors already installed on the three leads, making installation super easy. In fact, after I received them, I wired one of the lights up to an old power cord, just to see how much light they put out. The housing and spring clips on the lights appear to be very well made. Because they do put out so much light, I ended up only needing to install 6 of them in the 12’x17′ dining room that I was working on… and the impression that I get from people when I first turn the lights on is “Wow!”.I can’t speak to the longevity as I just installed them, but so far I am very impressed with packaging, quality of the lights and connection boxes, ease of installation, appearance and light output.
djkato2001 –
Replaced all my 60watts bulbs around the house to these flat LEDS, they light up way better than bulbs, they are easy to install and we have seen a few dollars saving in our electric bill. Highly recommend them!